Service Information

Captiva

Engine Coolant Temperature Sensor Replacement - LF1 or LFW

Callout	Component Name
Preliminary Procedure Partially drain the cooling system. Refer to Cooling System Draining and Filling .
1	Engine Coolant Temperature Sensor Caution: Refer to Fastener Caution in the Preface section. Procedure Reposition the sensor heat shield. Disconnect the ECT sensor harness connector. Tighten 20 N·m (35 lb in)

Callout

Component Name

Partially drain the cooling system. Refer to Cooling System Draining and Filling .

Engine Coolant Temperature Sensor

Caution: Refer to Fastener Caution in the Preface section.

Tighten
20 N·m (35 lb in)