To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Feed Intermediate Pipe Replacement - LF1 or LFW


2193089

Callout

Component Name

Preliminary Procedures

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  3. Remove the fuel pipe shield. Refer to Fuel Pipe Shield Replacement : LF1 or LFW .

1

Fitting (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten

    • Tighten the fittings in sequence as numbered: 1, 2, 3
    • First Pass 15 N·m (11 lb ft)
    • Second Pass 30 N·m (22 lb ft)

2

Fuel Feed Intermediate Pipe

Procedure

  1. Discard the pipe when removed and install a NEW pipe.
  2. Lubricate the pipes with silicon free engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers .
  3. Pressure up the fuel system and check for leaks.
   


© Copyright Chevrolet. All rights reserved