Captiva
Inlet Manifold Assemble - LF1, LFW or LFX
Install the NEW plastic compression limiters (1).
Install the NEW lower intake manifold gaskets (3).
Install the lower intake manifold (2) and bolts (1).
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the lower intake manifold bolts (1) to
7 N·m (62 lb in)
.
Install the MAP sensor (2).
Install the MAP sensor bolt (1) and tighten to
4 N·m (35 lb in)
.
Install the EVAP solenoid (1).
Tighten the EVAP solenoid bolt to
10 N·m (89 lb in)
.
Install the NEW throttle body seal (3).
Install the throttle body (2).
Install the throttle body bolts (1) and tighten to
10 N·m (89 lb in)
.
© Copyright Chevrolet. All rights reserved