To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Mount Bracket Replacement - LE5, LE9 or LAF

Removal Procedure


    1656094
  1. Remove the engine mount. Refer to Engine Mount Replacement : LE5 or LE9 .
  2. Remove the engine mount bracket to engine bolts.
  3. Remove the engine mount bracket.

Installation Procedure


    1656094
  1. Position the engine mount bracket to the engine.
  2. Install the engine mount bracket bolts in the following locations:
  3. • The long bolts in the forward and lower rear holes
    • The short bolt in the upper rear hole

    Caution: Refer to Fastener Caution in the Preface section.

  4. Tighten the engine mount bracket bolts in the sequence shown to 100 N·m (74 lb ft)
  5. Install the engine mount. Refer to Engine Mount Replacement : LE5 or LE9 .
   


© Copyright Chevrolet. All rights reserved