To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Driver Knee Bolster Replacement - Short Body


2233875

Callout

Component Name

Preliminary Procedure

Remove the bonnet release cable handle. Refer to Bonnet Primary Catch Release Cable Handle Replacement .

1

Drivers Knee Bolster Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Drivers Knee Bolster Assembly

Tip
Left hand drive vehicle shown, right hand drive vehicle similar.

   


© Copyright Chevrolet. All rights reserved