Captiva

Rear Side Door Window Channel Replacement

1. Place the front door window in the full down position.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement : Long Body  → Short Body .
3. Remove the water deflector.
4. Starting at one end, carefully pull the window weatherstrip channel from the door frame.

1. Align the notch in the window weatherstrip seal to the fixed window post and press the weatherstrip onto the window flange.

1.1.	Press the weatherstrip channel onto the door flange.

1.2.	Ensure that the weatherstrip is fully secured into the channel upper corners and sides of the door frame.

2. Install the water deflector.
3. Install the rear door trim panel. Refer Rear Side Door Trim Panel Replacement : Long Body  → Short Body .
4. Inspect the door window for proper operation before installing the door trim panel.