To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Side Door Trim Panel Replacement - Long Body

Removal Procedure


    1758386
  1. Lower the rear window.
  2. Remove the rear door handle cover.
  3. Remove the rear door handle screws.

  4. 1758387
  5. Remove the rear side door trim. Use a suitable tool.
  6. Disconnect the electrical connectors.

Installation Procedure


    1758387
  1. Install the rear door trim panel.
  2. Connect the electrical connectors.
  3. Caution: Refer to Fastener Caution in the Preface section.


    1758386
  4. Install the rear door trim screws and tighten to 3 N·m (27 lb in).
  5. Install the rear door handle cover.
  6. Raise the rear window.
   


© Copyright Chevrolet. All rights reserved