To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Theft Deterrent Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    1855668
  1. Disconnect the negative battery cable.
  2. Remove the roof console assembly. Refer to Roof Console Replacement .
  3. Disconnect the electrical connector from the intrusion sensor.
  4. Remove the screws and the intrusion sensor bracket.
  5. Remove the intrusion sensor.

Installation Procedure


    1855668
  1. Install the intrusion sensor.
  2. Install the intrusion sensor bracket and screws.
  3. Connect the electrical connector to the intrusion sensor.
  4. Install the roof console assembly. Refer to Roof Console Replacement .
  5. Connect the negative battery cable.
   


© Copyright Chevrolet. All rights reserved