Preliminary Procedures

1. Remove the headlamps. Refer to Headlamp Replacement : Long Body  → Short Body .
2. Remove the hood release handle. Refer to Bonnet Primary Catch Release Cable Handle Replacement .
3. Remove the radiator opening upper cover. Refer to Radiator Opening Upper Cover Replacement : Long Body .

1

Bonnet Latch Release Cable Bolt (Qty: 2)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Bonnet Latch Release Cable

Procedure

1. Disconnect the bonnet release cable from the bonnet latch by squeezing the bonnet release cable retainer.
2. Attach mechanic's wire to the existing cable to ease installation of the new cable.
3. Release the cable from the latch assembly and pull through the dash panel.