Preliminary Procedure

Remove the radiator opening upper cover. Refer to Radiator Opening Upper Cover Replacement : Long Body .

1

Headlamp Assembly Bolt (Qty 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
7.5 N·m (66 lb in)

2

Headlamp Assembly

Procedure

1. Pull on the outer edge of the headlamp assembly in order to release the headlamp housing bracket locator pin from the wing flange.
2. Disconnect the connector positive assurance connector.
3. Disconnect the electrical connectors from the headlamp assembly.
4. Upon assembly, secure the headlamp housing bracket locator pin to the wing flange.
5. Align the locator pin on the headlamp to the front impact and upper tie bar locations.
6. Snap the locator pin into the retainer.
7. Secure the headlamp bolts
8. Adjust the headlamp aim. Refer to Headlamp Aiming .