Preliminary Procedures

1. Disconnect the air cleaner outlet duct from the air cleaner assembly. Refer to Air Cleaner Outlet Duct Replacement .
2. If required, remove the throttle inlet absolute pressure sensor. Refer to Throttle Inlet Absolute Pressure Sensor Replacement .
3. If required, remove the mass airflow sensor. Refer to Mass Airflow Sensor with Inlet Air Temperature Sensor Replacement .

1

Air Cleaner Assembly Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Air Cleaner Assembly