Captiva

Bonnet Latch Adjustment

1. Release the primary bonnet latch in order to inspect the operation of the pop-up spring.
2. Attempt to raise the bonnet while the bonnet is in the pop-up position.

•	The bonnet should raise without the bonnet striker binding against the latch.

•	The secondary latch should engage in order to prevent the bonnet from being raised.

1. Loosen the bolts retaining the bonnet latch to the support bracket.

Caution : Refer to Fastener Caution in the Preface section.

2. Move the bonnet latch from side to side until the striker enters the centre of the latch assembly and tighten to 10 N·m (89 lb in).