To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Windscreen Pillar Garnish Moulding Replacement - Short Body


2002057

Callout

Component Name

Preliminary Procedure

Disable the SIR system. Refer to SIR Disabling and Enabling .

1

Windscreen Garnish Moulding Assembly

Procedure

  1. Tether clip at upper portion of garnish moulding MUST be replaced every time windscreen pillar moulding is removed.
  2. Starting at the top, gently pull on the garnish moulding to disengage the clip.
  3. Tabs must be installed prior to retainer clip.
  4. Tabs to be fully seated in instrument panel trim panel retainer and valance panel.
   


© Copyright Chevrolet. All rights reserved