To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Steering Wheel Inflatable Restraint Module Replacement


1839343

Callout

Component Name

Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section.

Warning: Refer to SIR Warning in the Preface section.

Preliminary Procedures

  1. Disable the SIR. Refer to SIR Disabling and Enabling .
  2. Insert a small blunt ended punch or equivalent tool, through the access openings on the left and right side of the steering wheel.
  3. Push the spring fastener inward to release the steering wheel inflator from the steering wheel.

1

Steering Wheel Inflatable Restraint Module Assembly

Procedure

  1. Release the connector position assurance (CPA) retainer.
  2. Disconnect the electrical connectors.
  3. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period.
   


© Copyright Chevrolet. All rights reserved