Preliminary Procedures

1. Remove the rear seat. Refer to Rear Seat Replacement : with AM9  → without AM9 .
2. Remove the rear seat recliner covers. Refer to Rear Seat Recliner Outer Finish Cover Replacement - Inboard : With 60 Percent Seat  → With 40 Percent Seat and Rear Seat Recliner Outer Finish Cover Replacement - Outboard : With 60 Percent Seat  → With 40 Percent Seat .
3. Remove the rear child seat bracket trim cover. Refer to Child Seat Bracket Access Hole Cover Replacement .
4. Remove the rear seat latch release strap bezel. Refer to Rear Seat Latch Release Strap Bezel Replacement .
5. Remove the rear seat back panel. Refer to Rear Seat Back Cushion Panel Replacement .

1

Rear Seat Head Restraint

Procedure

1. Depress the button on the left head restraint guide to raise the head restraint to the full up position.
2. Insert a small diameter tool into the hole on the right hand side of the right head restraint guide and pull upward to remove.

2

Rear Seat Head Restraint Guide (Qty: 2)

Procedure

Squeeze the bottom of the head restraint guide together and push up to remove.