To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Seat Cushion Cover and Pad Replacement


1867251

Callout

Component Name

Preliminary Procedures

  1. Remove the rear seat. Refer to Rear Seat Replacement : with AM9  → without AM9 .
  2. Remove the rear seat recliner covers. Refer to Rear Seat Recliner Outer Finish Cover Replacement - Inboard : With 60 Percent Seat  → With 40 Percent Seat and Rear Seat Recliner Outer Finish Cover Replacement - Outboard : With 60 Percent Seat  → With 40 Percent Seat .
  3. Remove the rear seat belt buckle. Refer to Rear Seat Buckle Side Belt Replacement : with 60 Percent Seat  → with 40 Percent Seat or Rear Seat Centre Buckle Side Belt Replacement .

1

Rear Seat Pivot Pin Clip (Qty: 2)

2

Rear Seat Pivot Pin (Qty: 2)

3

Rear Seat Cushion Cover

Procedure

  1. Lift the rear seat cushion frame up away from the seat riser far enough to slide the seat cushion cover away from the frame.
  2. Disconnect the rear seat cushion cover J-channels and straps from the rear seat cushion frame.
  3. Remove the rear seat cushion cover from the rear seat cushion pad.

4

Rear Seat Cushion Pad

   


© Copyright Chevrolet. All rights reserved