Captiva

Rear Window Washer Nozzle Replacement - Short Body

1. Remove the tailgate upper applique. Refer to Tailgate Upper Applique Replacement : Short Body  → Long Body .
2. Invert the tailgate upper applique and place on a clean dry, protected surface.



3. Remove the spoiler to high mounted brake lamp screws (1).
4. Disengage the washer hose from the tailgate upper applique.
5. Disengage the electrical connector (2) from the tailgate upper applique bracket.
6. Lift the high mounted brake lamp (3) from the tailgate upper applique.



7. Remove the washer nozzle screws (1).
8. Remove the rear washer nozzles (3) from the high mounted brake lamp (4) assembly.
9. Disconnect the rear washer hose from the nozzles.

1. Secure the rear washer hose (2) to the washer nozzles (3).
2. Install the washer nozzles (3) into the rear high mounted brake lamp assembly (4).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the rear window washer nozzle screws (1). Tighten2 N·m (18 lb in).



4. Position the high mounted brake lamp (3) to the tailgate upper applique bracket.
5. Install the screws (1) to secure the high mounted brake lamp to the tailgate upper applique bracket. Tighten screws at 2 N·m (18 lb in).
6. Position and secure the high mounted brake lamp electrical connector (2).
7. Secure the washer hose to the tailgate upper applique.
8. Install the tailgate upper applique. Refer to Tailgate Upper Applique Replacement : Short Body  → Long Body .