To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Windscreen Washer Hose Replacement - Short Body

Removal Procedure

    Note: The left-hand drive is shown. The right-hand drive is similar.

  1. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement : Short Body .

  2. 1413118
  3. Separate the front washer nozzle hose from the front washer solvent container hose that runs along the upper motor compartment rail.
  4. Remove the front washer nozzle hose.

Installation Procedure


    1413118
  1. Connect the front nozzle hose to the front washer solvent container hose that runs along the upper motor compartment rail.
  2. Position the washer hoses into the vehicle.
  3. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement : Short Body .
   


© Copyright Chevrolet. All rights reserved