Preliminary Procedures

1. Open the rear body-side doors on the side the lower rocker moulding will be serviced from.
2. Remove the rear splash guard if equipped. Refer to Splash Guard Replacement - Rear : Long Body .

1

Rocker Panel Moulding Retainer Lower (Qty: 4)

Procedure

Release the 4 lower retainers using a trim-type release tool.

2

Rocker Panel Moulding Retainer Upper (Qty: 5)

Procedure

Release the 5 upper retainers using a trim-type release tool.

3

Rocker Panel Moulding Assembly

Tip
Remove the lower rocker moulding from the body-side outer panel.