To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Headlamp Leveling Rear Suspension Height Sensor Replacement


2269481

Callout

Component Name

Preliminary Procedure

Remove the right rear wheel and tyre assembly. Refer to Tire and Wheel Removal and Installation .

1

Headlamp Levelling Rear Suspension Height Sensor Nut

2

Headlamp Leveling Rear Suspension Height Sensor

Procedure

  1. Disconnect the electrical connector.
  2. Remove the headlamp levelling rear suspension height sensor nut.
  3. Remove the sensor from the rear suspension trailing arm bolt.
  4. Rotate the sensor rearward and release the tab from the rear suspension trailing arm hole.
  5. Remove the headlamp levelling rear suspension height sensor from the rear suspension trailing arm.
   


© Copyright Chevrolet. All rights reserved