Preliminary Procedure

Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Rear Window Washer Pump

Procedure

1. Drain the windscreen washer solvent into a suitable clean container.
2. Disconnect the electrical connector to the rear washer pump.
3. Disconnect the washer pump hose at the pump.
4. Using 2 flat-bladed tools under the base of the washer pump, pry upward in order to release the pump from the washer pump grommet.
5. Discard the washer pump and grommet.

Tip
Use full strength washer solvent on the new grommet in order to aid in the installation of the new rear washer container pump.