To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Valve Rocker Arm Installation - Left Side


    1400021
  1. Apply a liberal amount of lubricant to the pivot pocket (1), roller (2) and valve slot (3) areas of the camshaft followers. Refer to Adhesives, Fluids, Lubricants, and Sealers for recommended lubricant.

  2. 1977900

    Note: The follower must be positioned squarely on the valve tip so that the full width of the roller will completely contact the camshaft lobe. If the followers are being reused you must put them back in their original location.

  3. Place the camshaft followers in position on the valve tip and stationary hydraulic clearance (lash) adjuster (SHLA).
  4. The rounded head end of the follower goes on the SHLA while the flat end goes on the valve tip.
  5. Clean the camshaft journals and carriers with a clean, lint-free cloth.
   


© Copyright Chevrolet. All rights reserved