Captiva

Engine Oil and Oil Filter Replacement

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Place a drain pan under the sump drain plug.
3. Remove the sump drain plug (1). Allow the oil to drain completely.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the sump drain plug (1) and tighten to 20 N·m (15 lb ft).



5. Place the drain pan under the oil filter.
6. Remove the oil filter. Allow the oil to drain completely.

1. Lubricate the NEW oil filter gasket with clean engine oil.
2. Tighten the oil filter to 30 N·m (22 lb ft).
3. Lower the vehicle.
4. Fill the engine with oil to the appropriate mark.
5. Start the engine and inspect for leaks.