Preliminary Procedures

1. Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement : Short Body .
2. Remove the front screws from the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Bumper Fascia Lower Bolt (Qty: 3)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Front Bumper Fascia Screw (Qty: 2)

Tighten
6 N·m (53 lb in)

3

Front Bumper Fascia

Procedure

1. Carefully push a small nylon wedge between the fascia and the wing. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia from the wing.
2. Disconnect the electrical connectors.