To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Bumper Fascia Replacement - Long Body


2414441

Callout

Component Name

Preliminary Procedures

  1. Remove the radiator opening upper cover. Refer to Radiator Opening Upper Cover Replacement : Long Body .
  2. Remove the front screws from the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Bumper Fascia Lower Bolt (Qty: 3)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (53 lb in)

2

Front Bumper Fascia Screw (Qty: 2)

Tighten
3 N·m (27 lb in)

3

Front Bumper Fascia

Procedure

  1. Carefully push a small nylon wedge between the fascia and the wing.
  2. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia from the wing.
  3. Disconnect the electrical connectors.
   


© Copyright Chevrolet. All rights reserved