To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Brake Fluid Level Indicator Switch Replacement — RHD

Removal Procedure


    2429079
  1. Disconnect the brake fluid level indicator switch electrical connector.
  2. Compress the brake fluid level indicator switch locking tabs on the outboard side of the master cylinder reservoir.
  3. Remove the brake fluid level indicator switch (1) from the master cylinder reservoir.

Installation Procedure


    2429079
  1. Install the brake fluid level indicator switch (1) to the master cylinder reservoir.
  2. Ensure the locking tabs on the brake fluid level indicator switch are securely engaged to the master cylinder reservoir.
  3. Connect the brake fluid level indicator switch electrical connector.
   


© Copyright Chevrolet. All rights reserved