To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Coolant Thermostat Housing Replacement - LF1


2203658

Callout

Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .

1

Heater Outlet Hose

2

Heater Inlet Hose

3

Expansion Tank Hose

4

Radiator Outlet Hose

5

Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (88 lb in)

6

Engine Cooling Thermostat Housing

Tip:

    • Clean the engine block and thermostat gasket surfaces.
    • Replace the gasket and any worn hoses.
   


© Copyright Chevrolet. All rights reserved