Captiva

Radiator Outlet Hose Replacement - V6

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



3. Disengage tension on the radiator outlet hose clamp (1) at the radiator using BO-38185 Hose Clamp Pliers .
4. Remove the radiator outlet hose (2) from the radiator.



5. Disengage tension on the radiator outlet hose clamp (1) at the engine using BO-38185 Hose Clamp Pliers .
6. Remove the radiator outlet hose (2) from the engine.
7. Remove the radiator outlet hose from the vehicle.

1. Install radiator outlet hose to the vehicle.




Note: Lubricate the inside diameters of the hose with clean coolant prior to installation.

2. Install the radiator outlet hose (2) to the engine.
3. Engage tension on the radiator outlet hose clamp (1) at the engine using BO-38185 Hose Clamp Pliers .



4. Install the radiator outlet hose (2) to the radiator.
5. Engage tension on the radiator outlet hose clamp (1) at the radiator using BO-38185 Hose Clamp Pliers .
6. Lower the vehicle.
7. Fill the cooling system. Refer to Cooling System Draining and Filling .