To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Heater Inlet Hose Replacement - V6


1872314

Callout

Component Name

Preliminary Procedures

  1. Remove the intake manifold cover. Refer to Inlet Manifold Cover Replacement .
  2. Partially drain the cooling system. Refer to Cooling System Draining and Filling .

1

Heater Inlet Hose Clamp (Qty: 2)

Procedure

Disengage tension on the heater inlet hose clip using BO-38185 Hose Clip Pliers

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer to Special Tools

2

Heater Inlet Hose

   


© Copyright Chevrolet. All rights reserved