To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Belt Replacement - LE5 or LE9


2254600

Callout

Component Name

Preliminary Procedures

Remove the engine shield. Refer to Engine Splash Shield Replacement .

1

Drive Belt

Procedure

  1. Using the EN-44811 tensioner unloader , rotate the drive belt tensioner anticlockwise to release the drive belt tension.
  2. Slide the drive belt off of the belt idler pulley.
  3. Slowly release the drive belt tensioner.

Special Tools

EN-44811 Accessory Belt Tensioner Unloader

For equivalent regional tools, refer to Special Tools : LE5 or LE9 .

   


© Copyright Chevrolet. All rights reserved