Captiva

Lower Oil Sump Installation - LNQ

1. Remove any old thread sealant, gasket material, or sealant using remover such as chisel or scraper.
2. Clean the lower oil pan and lower oil pan components with solvent.

Note:  Ensure that the sealing surface is clear of oil, grease and old sealant material.

3. Clean out debris from the bolt holes.

Warning: Refer to Safety Glasses Warning in the Preface section.

4. Dry the lower oil pan and lower oil pan components with compressed air.




Note: The complete installation procedure of the lower sump should be done in 10 minutes.

Note: Do not coat sealing compound on the lower oil sump bolt holes and bolt threads.

5. Apply sealing compound on the sealant line (1).



6. Install the lower oil sump (1).

Caution: Refer to Fastener Caution in the Preface section.

7. Install the lower oil sump mounting bolts (2) and tighten evenly to 10 N·m (89 lb in).