To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Inlet Manifold Installation


    2469604
  1. Install the intake manifold assembly (3).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the intake manifold assembly retaining bolts (1) and nuts (2) and tighten to 25 N·m (18.4 lb ft).
  3. Install the exhaust gas recirculation cooler assembly. Refer to Exhaust Gas Recirculation Cooler Installation .
   


© Copyright Chevrolet. All rights reserved