To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Gas Recirculation Cooler Installation


    2469579
  1. Install the exhaust gas recirculation cooler assembly (3) and new gasket (4).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the exhaust gas recirculation cooler assembly retaining bolts (1) and nut (2) and tighten to 25 N·m (18.4 lb ft).
  3. Install the EGR manifold cooling return hose . Refer to Exhaust Gas Recirculation Manifold Cooling Return Hose Installation .
  4. Install the EGR manifold cooling feed hose . Refer to Exhaust Gas Recirculation Manifold Cooling Feed Hose Installation .
  5. Install the EGR pipe. Refer to Exhaust Gas Recirculation Pipe Installation .
  6. Connect the vacuum pump hose line.
   


© Copyright Chevrolet. All rights reserved