To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injection Fuel Feed Pipe Replacement


2473963

Callout

Component Name

Preliminary Procedures

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

1

Fuel Injection Fuel Feed Pipe

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Remove the fuel feed pipes from the fuel rail, fuel injectors, and fuel pump.
  2. Install EN-50434 dust caps onto the fuel rail ports to avoid fuel rail contamination.
  3. Upon completion of the repair, perform the fuel system priming procedure. Refer to Fuel System Priming .

Tighten
27 N·m (20 lb ft)

Special Tools

EN-50434 Fuel Rail Port Dust Caps

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved