To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Pressure Differential Sensor Replacement


2472632

Callout

Component Name

Preliminary Procedure

Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

1

Exhaust Pressure Differential Sensor Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Exhaust Pressure Differential Sensor

Procedure

  1. Disconnect the electrical wiring harness connector.
  2. Disconnect the exhaust pressure differential sensor hoses.
   


© Copyright Chevrolet. All rights reserved