To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Belt Replacement


2478476

Callout

Component Name

Preliminary Procedures

  1. Remove the engine shield. Refer to Engine Sight Shield Replacement
  2. Remove the drive belt and pulley cover. Refer to Drive Belt and Pulley Cover Replacement .

1

Drive Belt

2

Tensioner

Procedure

  1. Use the EN-44811 tensioner to unload, rotate the drive belt tensioner anticlockwise to release the drive belt tension.
  2. Slide the drive belt off of the belt idler pulley.
  3. Slowly release the drive belt tensioner.

Special Tools

EN-44811 Accessory Belt Tensioner Unload

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved