To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Oil Pressure Switch Replacement


2476593

Callout

Component Name

Preliminary Procedure

  1. Remove the Air Cleaner Assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement .

1

Engine Oil Pressure Sensor and/or Switch

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

Procedure

  1. Disconnect the oil pressure sensor electrical connector.
  2. Transfer components as necessary.

Tighten
20 N·m (15 lb ft)

   


© Copyright Chevrolet. All rights reserved