Preliminary Procedures

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
2. Install the engine support fixture. Refer to Engine Support Fixture .
3. Prior to removing the mount, mark the mount location using spray paint or a marker for correct positioning during installation.

If all powertrain mounts are replaced, perform "Powertrain Mount Balancing". Refer to the appropriate engine section.

1

Engine Mount to Bracket Fastener (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Perform the "Powertrain Mount Balancing-lower". Refer to the appropriate engine section.

Tighten
58 N·m (43 lb ft)

2

Engine Mount to Body Fastener (Qty: 2)

Tighten
85 N·m (63 lb ft)

3

Engine Mount

Procedure

Transfer components as necessary.