To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Ignition Coil Replacement - LE5, LE9, or LAF

Removal Procedure


    1890099
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement : LE5 or LE9 .
  2. Disconnect the engine wiring harness electrical connectors (1) from the ignition coil(s) (2).

  3. 1578474
  4. Remove the ignition coil bolt(s).
  5. Remove the ignition coil(s).

Installation Procedure


    1578474
  1. Install the ignition coil(s).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the ignition coil bolt(s) and tighten to 10 N·m (89 lb in).

  4. 1890099
  5. Connect the engine wiring harness electrical connector(s) (1) to the ignition coil(s) (2).
  6. Install the inlet manifold cover. Refer to Intake Manifold Cover Replacement : LE5 or LE9 .
   


© Copyright Chevrolet. All rights reserved