Adding Keys
Note:
| • | To initiate, this procedures requires that a learned master key be available. |
| • | A total of 10 keys may be programmed to a single vehicle. |
| • | This procedure adds keys only. The procedure does not erase previously learned keys. |
| • | The keys to be learned must duplicate the mechanical cut of the current key. |
| • | If more than one valet key is to be learned, immediately precede each valet key with a learned master key. |
- With a previously learned master key, turn ON the ignition, with the engine OFF.
- Turn OFF the ignition and remove the key.
- Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.
| © Copyright Chevrolet. All rights reserved |
