Captiva

Camshaft Bearing Cap Installation — Rear

1. Clean the sealing surfaces.




Note: The complete installation procedure of the camshaft guide should be done in 10 minutes.

Note: Do not coat sealing compound on the camshaft guide bolt holes.

2. Apply sealing compound on the sealant line (1).



3. Install the camshaft guide (1).

Caution: Refer to Fastener Caution in the Preface section.

4. Install the 3 camshaft guide retaining bolts (3) and tighten to 25 N·m (18 lb ft).
5. Install the 2 camshaft guide retaining bolts (2) and tighten to 10 N·m (89 lb in).