To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Block Disassemble - LE5 or LE9


    412447
  1. Remove the engine block coolant drain plug.
  2. Remove the rear oil passage plug.
  3. Remove the 6 oil passage plugs on the sides of the block .
  4. Remove the 2 water passage plugs on the top of the block .
  5. Remove the 2 front oil passage plugs.

    6. 1977766
  6. Remove the knock sensor and bolt.

    7. 630350
  7. Remove the oil pressure switch .

    8. 630345
  8. Remove the crankshaft position (CKP) sensor and bolt.

    9. 1594334
  9. If equipped, loosen the piston oil nozzle assembly bolt and remove the piston oil nozzle assembly.
   


© Copyright Chevrolet. All rights reserved