Captiva
Range Selector Lever Cable Replacement
Removal Procedure
Disconnect the range select cable (1) from the range select lever.
Release the range select cable retaining clip (2) and remove the cable from the range select cable bracket.
Remove the front floor console. Refer to
Front Floor Console Replacement
:
Short Body
→
Long Body
.
Remove the range select cable (2) from the automatic transmission range select lever pin.
Remove the range select cable (1) from the automatic transmission range select lever housing.
Remove the grommet nuts (1) and the range select cable grommet (2) from the cowl.
Remove the range select cable from the vehicle.
Installation Procedure
Install the range select cable to the vehicle through the cowl and the carpet.
Install the range select cable grommet (2) and the grommet nuts (1) and tighten to
10 Nm (89 lb in).
.
Install the range select cable (1) to the automatic transmission range select lever housing.
Install the range select cable (2) to the automatic transmission range select lever pin.
Install the front floor console. Refer to
Front Floor Console Replacement
:
Short Body
→
Long Body
.
Install the range select cable to the range select cable bracket. Ensure the range select cable retaining clip (2) is secured in the bracket.
Connect the range select cable (1) to the range select lever.
Adjust the cable. Refer to
Range Selector Lever Cable Adjustment
.
© Copyright Chevrolet. All rights reserved