Preliminary Procedures

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the engine shield. Refer to Engine Shield Replacement .
3. Support the powertrain with a suitable jack stand.

1

Transmission Front Mount Through Fastener (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
100 N·m (74 lb ft)

2

Transmission Front Mount Fastener (Qty: 3)

Tighten
110 N·m (81 lb ft)

3

Transmission Front Mount