Aveo_Sonic

Battery Negative Cable Disconnection and Connection - LCU,LDE

1. Turn on the radio and record all of the customer radio station presets.
2. Ensure that all lamps and accessories are turned off.
3. Turn the ignition OFF and remove the ignition key.

Warning: Refer to Battery Disconnect Warning in the Preface section.




4. Loosen the battery negative cable nut (2).
5. Remove the battery negative cable (1) from the battery.

1. Install the battery negative cable (1) to the battery.

Caution: Refer to Fastener Caution in the Preface section.

2. Fasten the battery negative cable nut (2) and tighten the nut to 4.5 N·m (40 lb in).
3. Insert the ignition key and turn the ignition to the ON position.
4. Program volatile memory. Refer to Control Module References .