Exhaust Front Pipe Replacement - LDE
Removal Procedure
Warning: Refer to Exhaust Service Warning in the Preface section.
- Disconnect the heated oxygen sensor-2. Refer to Heated Oxygen Sensor Replacement - Sensor 2 .
- Remove the exhaust muffler nuts (1) and remove the exhaust muffler (4) from the exhaust isolators (2).
- Remove the exhaust front pipe (3) to the catalytic converter nuts (1).
- Remove the front pipe (3) from the catalytic converter and discard the exhaust gasket (2).
Installation Procedure
- Install a NEW gasket (3) to the exhaust front pipe.
Caution: Refer to Fastener Caution in the Preface section.
- Install the exhaust muffler (4) to the exhaust isolators (2) and tighten the nuts (1) to 17 N·m (13 lb ft).
- Position the exhaust front pipe (3) to the catalytic converter with a NEW gasket (2).
- Install the exhaust front pipe nuts (1) to the catalytic converter and tighten to 20 N·m (15 lb ft).
- Connect the heated oxygen sensor-2. Refer to Heated Oxygen Sensor Replacement - Sensor 2 .
- Start the engine and check for exhaust leaks.
© Copyright Chevrolet. All rights reserved |