To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injection Pump Drive Pulley Installation

Special Tools

    • EN-956-1 Handle / Extension
    • EN-6347 Bracket

For equivalent regional tools, refer to Special Tools


    2027506
  1. Fuel injection pump drive gear key (1).

    2. Note: Ensure that the recess (2) on the fuel pump drive pulley (2) and the fuel injection pump drive gear key (1) are on the same position, otherwise the sprocket could be damaged during the installation.

  2. Install fuel pump drive pulley (4).
  3. Install fuel pump drive pulley nut (3).

    4. 2027088
  4. Install EN-6347 bracket and EN-956-1 handle  (2) to fix the fuel pump drive pulley (1).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Tighten the fuel pump drive pulley nut to  70 N·m (52 lb ft).
   


© Copyright Chevrolet. All rights reserved