To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Mode Control Cam Replacement — Left Hand Drive

Removal Procedure

  1. Remove the brake, accelerator, and clutch pedal. Refer to Brake, Accelerator, and Clutch Pedal Replacement .
  2. Remove the mode control cam actuator. Refer to Mode Control Cam Actuator Replacement

  3. 2027962
  4. Remove mode control cam (1).

Installation Procedure


    2027962

    Note: The mode control cam can only be fitted in one position.

  1. Install mode control cam (1).
  2. Install the mode control cam actuator. Refer to Mode Control Cam Actuator Replacement
  3. Install the brake, accelerator, and clutch pedal. Refer to Brake, Accelerator, and Clutch Pedal Replacement .
   


© Copyright Chevrolet. All rights reserved