Preliminary Procedures

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the floor air outlet duct - left side. Refer to Floor Air Outlet Duct Replacement - Left Side .

1

Mode Control Cam Actuator Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Mode Control Cam Actuator

Procedure

1. Disconnect the electrical connector.
2. For recalibration of the mode control cam actuator, refer to Actuator Recalibration .