Cruze |
||||||||
|
|
|
|||||||
| Table 1: | Trailer Interface Control Module Scan Tool Data Parameters |
| Table 2: | Trailer Interface Control Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage | -- | Varies 12-14 V | The scan tool displays volts. This is the voltage of the trailer lighting converter. |
Brake Pedal Switch Status | -- | Inactive | The scan tool displays Active when the brake pedal is pressed. The scan tool displays Inactive when the brake pedal is released. |
Key in Ignition Status | -- | Active | The scan tool displays Active when the Ignition is ON. |
Trailer Connection Detected | -- | No | The scan tool displays Yes if a trailer is connected to the vehicle. |
Output Control | Description |
|---|---|
Left Trailer Tail Lamp | Commands the left trailer tail lamp ON and OFF |
Left Trailer Indicator Lamp | Commands the left trailer indicator lamp ON and OFF |
Left Auxiliary Tail and Brake Lamp | Commands the left auxiliary tail and brake lamp ON and OFF |
Left Rear Auxiliary Indicator Lamp | Commands the left rear auxiliary indicator lamp ON and OFF |
Left Tail Lamp | Commands the left tail lamp ON and OFF |
Right Trailer Tail Lamp | Commands the right trailer tail lamp ON and OFF |
Right Trailer Indicator Lamp | Commands the right trailer indicator lamp ON and OFF |
Right Auxiliary Tail and Brake Lamp | Commands the right auxiliary tail and brake lamp ON and OFF |
Right Rear Auxiliary Indicator Lamp | Commands the right rear auxiliary indicator lamp ON and OFF |
Right Tail Lamp | Commands the right tail lamp ON and OFF |
Trailer Brake Lamps | Commands the trailer brake lamps ON and OFF |
Trailer Reverse Lamps | Commands the trailer backup lamps ON and OFF |
Trailer Fog Lamp(s) | Commands the trailer fog lamp(s) ON and OFF |
| © Copyright Chevrolet. All rights reserved |
